RC Bumper Conversion Installation
Thursday June 19, 2003

This is an installation on a 1991 Toyota Celica GT Coupe. A few things to note on this particular installation, the fender does not need to be removed as depicted here. It so happened that the previous owner had a slight fender bender and it was bondoed to the stock bumper. This is why it had to come off with the fender attached.

The images are more or less in order and can hopefully can be helpful to someone installing their bumper. The hardest part about this installation is the number of screws you have to remove, other than that the most challenging part was removing the stock crashbar bolts.

rcbumper-01
rcbumper-02
rcbumper-03
rcbumper-04
rcbumper-05
rcbumper-06
rcbumper-07
rcbumper-08
rcbumper-09
rcbumper-10
rcbumper-11
rcbumper-12
rcbumper-13
rcbumper-14
rcbumper-15
rcbumper-16
rcbumper-17
rcbumper-18
rcbumper-19
rcbumper-20
rcbumper-21
rcbumper-22
rcbumper-23
rcbumper-24
rcbumper-25
rcbumper-26
rcbumper-27
rcbumper-28
rcbumper-29
rcbumper-30
rcbumper-31
rcbumper-32
rcbumper-33
rcbumper-34
rcbumper-35
rcbumper-50
rcbumper-53
rz10
rz8
rz9

home | 5SFE Image Gallery | contact

back to home Copyright © 2003 Simple Industries, Inc.